Yamaha DME Designer Owner's Manual page 167

Chapter 4 Designer
"Edit Port Label" Dialog Box
When you click the [Edit I/O Port Label]/[Edit SlotN I/O Port Label] button, the "Edit Port Label"
dialog box is displayed. Here you can set the port labels displayed for components. Enter a [Short
Name] and [Long Name] for [Inputs] and [Outputs]. You can enter up to 100 English characters for
each name.
You can switch between long and short port names displayed in the configuration window with the
[Port Long Name] command in the [View] menu. When you select this command, a checkmark
appears next to it and long names are displayed. If you select this command while a checkmark is
next to it, the checkmark disappears and short names are displayed.
When the Port Style On Zone Window [Custom Port Style] is selected, labels specified here will not
appear in the Zone Window. Labels specified here are always displayed in the Configuration
Window.
Edit Port Label and Type Dialog Box
The Edit Port Label and Type dialog box will appear when the [Edit Port Label and Type ..] button is
clicked. Here you can specify the port labels and types to be displayed in for the components.
To set labels enter the [Port Name] for [Left] and [Right]. Each name can be up to 100 characters in
length.
To set the port type use [Port Type] to select the [Left] and [Right] types.
DME Designer Owner's Manual 167