Software Download And Reboot - D-Link DES-3010FA Web User Manual

D-Link DES-3010FA/GA User Guide
Note
When selecting an option from the Startup menu, time must be taken into account. If no selection is made
within 35 seconds (default), the device times out. This default value can be changed through the CLI.
Only technical support personnel can use Diagnostics Mode. For this reason, Diagnostics Mode is not described
in this guide.

Software Download and Reboot

This section describes the procedures for downloading software and rebooting the system, and includes the
following topics:
•
Software Download from the Startup Menu
•
Erasing the Flash File
•
Password Recovery
•
Software Download through TFTP Server
•
Software Download through XModem
Software Download from the Startup Menu
The software download procedure is performed when a new version must be downloaded to replace corrupted
files, or when the system software must be upgraded. To download software from the Startup menu:
1. From the Startup menu, press
Downloading code using XMODEM
2. When using HyperTerminal, click Transfer on the HyperTerminal Menu Bar.
3. In the Filename field, enter the file path for the file to be downloaded.
4. Ensure that the Xmodem protocol is selected in the Protocol field.
5. Press Send. The software is downloaded.
Note
After software download, the device reboots automatically.
Erasing the Flash File
In some cases, the device configuration must be erased. If the configuration is erased, all parameters configured
via CLI, EWS, or SNMP must be reconfigured.
To erase the device configuration:
1. From the Startup menu, press
displayed:
Warning! About to erase a Flash file.
Are you sure (Y/N)? y
2. Press . The following message is displayed.
Y
Write Flash file name (Up to 8 characters, Enter for none.):config
File config (if present) will be erased after system initialization
======== Press Enter To Continue ========
3. Enter config as the name of the flash file. The configuration is erased and the device reboots.
. The following prompt appears:
[1]
within two seconds to erase the flash file. The following message is
[2]
Page 44