Setting Up And Connecting; Set-Up Location Requirements; Electrical Connection - Silvercrest 416131 2210 Operating Instructions Manual

NOTE
No user action is required to switch the product between
►
50 and 60 Hz . The product adapts automatically to either
50 or 60 Hz .

Setting up and connecting

Set-up location requirements

For safe and trouble-free operation of the device , the set-up location must fulfil
the following requirements:
■ When setting it up, place the appliance on a firm, flat and horizontal
surface .
■ Do not place the device in a hot, wet or extremely damp environment or in
the vicinity of flammable materials .
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency .

Electrical connection

CAUTION
► Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network .
These data must agree so that no damage is sustained by the device .
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges .
► Ensure that the power cable is not taut or kinked .
► Do not let the power cable hang over edges (trip wire effect) .
♦ Insert the plug into the mains power socket .
■ 6 │ GB │ IE SV 125 C6