Sony CBK-RPU7 Operating Instructions Manual page 11

2
Fasten the bracket using the two screws on
the top of camera mount bracket A.
3
Attach camera mount bracket B to the unit
using four hex screws supplied with the unit.
You can also attach the bracket using the
holes shown in the following diagram.
4
Attach camera mount bracket B to camera
mount bracket A.
Insert the positioning pins on the sides of
camera mount bracket B into the grooves on
the sides of camera mount bracket A, then
insert the positioning pins of camera mount
bracket A into the holes on the bottom (same
on left and right). You can adjust the
attachment position of camera mount bracket
B to suit the size of the battery attached to the
camcorder.
Camera mount
bracket A
positioning pin
5
Fasten camera mount bracket B using the four
screws on the sides.
11
Camera mount bracket B
positioning pin