Changing The Settings - Panasonic AlCare TK-AS500 Operating Instructions Manual

Changing the Settings

Preparation: Please turn off the faucet.
Setting the
Alkaline priority
mode
Muting the Acidic
buzzer
The above settings cannot be made during automatic electrode cleaning (P. EN31).
z
EN32
How to change
At the time of purchase, the product is in the purified water selection mode when
water is stopped after use of purified water.
Performing the following operation restores the product to the state where
Alkaline 1, 2 or 3 is selected even after use of purified water.
Note that purified water flows for 10 minutes in the automatic continuation mode.
(P. EN27)
Press approx. 3 seconds.
To cancel the setting
„
Press the button approx. 3 seconds again.
When the setting is canceled, purified water remains selected even if water is
z
stopped after use of purified water. (state at the time of purchase)
This setting mutes the buzzer sound that beeps while weak acidic water is used.
Press approx. 3 seconds.
To restore the buzzer sound
„
Press the button approx. 3 seconds again.
The buzzer can also be stopped temporarily without setting.(P. EN27)
z
PiPiPiPi
Pi
Pi
PiPiPiPi