Table of Contents
Advertisement
4. Test Run
Step1. Press "
"and " "simultaneously for 3 seconds to display the
test run screen of OFF state.
Step2. Press "
"to switch mode and press "
speed.
Step3. Press " "to enter into the test run screen of ON state.
Step4. Press "
"to switch mode and press "
speed, and press " "or " "to set the test run time.
•
The setting time range is from 30 minutes to 600 minutes.
•
Press " "or " " can adjust the test run time by 30 minutes
with each single press.
Step5. Press " "to end the test run and return to home screen.
NOTES:
•
When a test run request is made from the outdoor unit or central controller, the screen automatically turns to
test run screen.
•
After transition to the test run screen, the operation mode and fan speed will remain the same state before the
test run setting.
•
In the case of two wired remote controllers, only the primary one can change the test run time.
"to switch fan
"to switch fan
4. Test Run
Connected Indoor Unit No.
Test Run Time
(120 minutes)
12
Advertisement
Table of Contents
