Table of Contents
Advertisement
2. Installation Work
Way 2. For controller that will be installed on the 86*86 Junction Box,
conduct holding bracket installation and cable connection by
followings steps:
a. Prepare field-supplied implanted 86*86 junction box.
b. Feed the cable through the conduit tube in the wall.
c. Connect the accessory cable to the field-supplied cable by
soldering. Insulate the connecting part with tape.
d. Secure the holding bracket to the junction box with M4
screws.
(3) Attach the controller body to the mounted holding bracket.
Be careful not to pinch the cable when attaching it.
(4) After installation, remove the protective film from the LCD screen.
9
86*86 Junction Box
(Field-supplied)
Cable Connection
Holding Bracket
M4 Screws
(Field-supplied)
Remove the
protective film.
上 上
Advertisement
Table of Contents
