Table of Contents
Advertisement
MPLS Guide
3.24.2.2.2
rsvp
Syntax
[no] rsvp
Context
config>router
Description
This command creates the RSVP-TE protocol instance and enables RSVP-TE configuration.
RSVP-TE is enabled by default.
RSVP-TE is used to set up LSPs. RSVP-TE should be enabled on all router interfaces that
participate in signaled LSPs.
The no form of this command deletes this RSVP-TE protocol instance and removes all
configuration parameters for this RSVP-TE instance. To suspend the execution and maintain
the existing configuration, use the shutdown command. RSVP-TE must be shut down before
the RSVP-TE instance can be deleted. If RSVP-TE is not shut down, the no rsvp command
does nothing except issue a warning message on the console indicating that RSVP-TE is still
administratively enabled.
Default
no shutdown
entropy-label-capability
Syntax
[no] entropy-label-capability
Context
config>router>rsvp
Description
This command enables or disables the entropy label capability for an RSVP-TE LSP. When
enabled, the egress LER (eLER) signals to the ingress LER (iLER) that the LSP is capable
of using entropy labels.
The no form of the command disables entropy label capability.
Default
no entropy-label-capability
graceful-shutdown
Syntax
[no] graceful-shutdown
Context
config>router>rsvp
config>router>rsvp>interface
3HE 18686 AAAB TQZZA
RSVP-TE Global Commands
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS and RSVP-TE
219
Advertisement
Table of Contents
