Table of Contents
Advertisement
MPLS and RSVP-TE
standby
Syntax
[no] standby
Context
config>router>mpls>lsp>secondary
Description
The secondary path LSP is normally signaled if the primary path LSP fails. The standby
keyword ensures that the standby secondary path LSP is signaled and maintained indefinitely
in a hot-standby state. When the primary path is re-established, the traffic is switched back
to the primary path LSP.
Note: A priority level can be assigned to standby secondary paths using the
preference
The no form of this command specifies that the secondary LSP is signaled when the primary
path LSP fails.
Default
n/a
212
command.
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
MPLS Guide
path-
3HE 18686 AAAB TQZZA
Advertisement
Table of Contents
