Advertisement
Available languages
Available languages
Step 15
Place one end of the S-Hook through the
hole on the side of the regulator as
shown.
Step 16
When an LP tank is not attached to the
smoker, use the S-Hook to hang the
hose/regulator
from the carry handle on
the side of the smoker. This will help
prevent dirt and other particles from
plugging the end of the assembly.
Step 17
Using a zip tie, secure the hose to the
front leg as shown. Do not pull the zip tie
tight, leave it just loose enough so that
the hose can be adjusted if needed.
Tying the hose to the leg helps prevent
the hose from coming into contact with
the hot burner chamber. Inspect the
installation underneath the smoker to
ensure that the hose is not rubbing any
portion of the burner chamber.
i
\
\
\
\
Zip Tie
12
Advertisement
