Sony G363-ZR0-LAX1 User Manual page 449

2
3
448
Still Image Operations
• Ext Key: external key
(This can only be selected when the pair mode is enabled. The signal
selected on the frame memory source 2 bus is used as the key signal.)
• Mix: mix
• Nam: non-additive mix
If none of the above is selected, image combination is not carried out.
Depending on the selection in step 1, set the following parameters.
• When [Pattern Key] is selected
Knob Parameter Adjustment
1 Size Size of pattern
2 Soft Edge softness of pattern
3 Pattern Pattern number
a) The patterns are the same as for a standard wipe. See "Wipe Pattern List" in Appendix
(Volume 1) (page 494).
• When [Ext Key] is selected
Knob Parameter Adjustment
1 Clip Reference level for key
signal generation
2 Gain Key sensitivity
• When [Mix] is selected
Knob Parameter Adjustment
1 Mix Rate Mix proportion
When you selected a pattern key, press [Pattern Adjust].
The Pattern Adjust menu appears. In the menu, set the pattern modifiers as
required.
• When turning [Position] on and setting the pattern position
Knob Parameter Adjustment
1 Position H Horizontal position
2 Position V Vertical position
a) See page 60.
• When turning [Multi] on and replicating the pattern
Setting values
0.00 to 100.00
0.00 to 100.00
a)
1 to 24
Setting values
+109.59 to –7.31
–100.00 to +100.00
Setting values
0.00 to 100.00
Setting values
a)
–100.00 to +100.00
a)
–100.00 to +100.00