Applying A Dme Effect To A Key - Sony G363-ZR0-LAX1 User Manual

5

Applying a DME Effect to a Key

Note
For one M/E bank, DME effects (including DME wipes) can be used in up to
two places on the dedicated interface and in only one place on the SDI interface
simultaneously.
When combining the SDI interface with the dedicated interface, you can apply
DME effects to a maximum of three keys. (Requires a setting in setup.)
For details, see "Interfacing With External Devices (Device Interface Menu)"
in Chapter 16 (Volume 2).
Assigning a DME to a key
1
2
360
Key Setting Operations Using Menus
Knob Parameter Adjustment
2 Soft Edge softness
• When utility 1 bus is selected
Knob Parameter Adjustment
1 Clip Reference level for creating mask
signal
2 Gain Gain
To invert the black and white sense of the mask source, press the [Mask
Invert] button, turning it on.
In the M/E-1 >Key1 menu, select HF5 'Processed Key.'
The Processed Key menu appears.
In the <DME Select> group, select the DME channel (DME1 to DME8) to
be used.
The lit colors of [DME1] to [DME8] indicate the DME assignment.
Lit green: Shows the DME assigned to the currently selected key.
Lit amber: Shows the DME assigned to a key other than the currently
selected key.
Off: DME is not assigned.
To select a DME being used by another keyer
Press [Override], turning it on, then select the DME channel.
The later selection is valid, and the button lights green.
Setting values
0.00 to 100.00
Setting values
+109.59 to –7.31
–100.00 to +100.00