Siemens SIMATIC S7-1500 System Manual page 354

Technical data
17.3 Electromagnetic compatibility
Category
The SIMATIC Drive Controller meets the electromagnetic compatibility requirements for drive
systems (PDS – Power Drive Systems) as defined in IEC 61800-3 category C2; 2. Environment.
Table 17- 1
Category
C2
To observe the limits according to EN 61800-3 category C2 for the SINAMICS S120 drive
system, additional measures, such as the use of line filters, may be necessary. For details, see
the SINAMICS S120 manuals.
Range of applications of drive systems
The SIMATIC Drive Controller and the SINAMICS S120 drive system are designed for use in the
Second Environment. They are intended for professional use in the industry, in specific
professions or industries and are not sold to the general public.
To meet the EMC requirements, the drive system must be installed EMC-compliant by trained
personnel taking into account the installation instructions in the SINAMICS S120 manuals.
Note
Trained personnel
Trained personnel have the necessary experience for the setup and/or commissioning of drive
systems (Power drive system - PDS) including their EMC aspects.
Further information
Additional information is available in the SINAMICS S120 manuals and in the EMC Installation
Guideline. (https://support.industry.siemens.com/cs/ww/en/view/60612658)
352
Category pursuant to EN 61800-3
Description
Fixed drive systems for rated voltages <1000 V for use in the Second
Environment. Use in the First Environment is possible if the drive system
is installed by a professional.
The system must be configured in accordance with the EC Declaration of
Conformity on EMC and the "EMC Design Guidelines" configuration
manual.
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD