Table of Contents
Advertisement
Section 2
Installation
2.1
Installation Environment
Table 2.1 shows the environmental conditions for the location in which the robot and
controller TS2000 are to be installed.
Table 2.1 Environmental conditions for the robot and controller
Item
Temperature
Humidity
Altitude
Vibration
Dust
Gas
Sunlight
Power source noise
Magnetic field
•
DO NOT place the robot and controller near combustibles. Otherwise, fires
could be caused if the material ignites due to a fault, etc.
TRANSPORTATION & INSTALLATION MANUAL
At operation
:
0 ~ 40°C
At storage
:
–10°C ~ 50°C
20 ~ 90 % (non-condensing)
DO NOT install the robot and controller at places where
they are exposed to splash of liquids such as water.
1,000 m or less
At operation
:
0.98 m/s
At transport
:
9.8 m/s
No inductive dust should be involved.
Consult with Toshiba Machine first if you have to use the
robot and controller in a hostile environment.
No corrosive gas or combustible gas should be involved.
The robot and controller should not be exposed to direct
sunlight.
No device causing an excessive noise should exist nearby.
No device causing a strong magnetic field should exist
nearby.
!
DANGER
– 2–1 –
Specifications
2
or less
2
or less
STE 80897
Advertisement
Table of Contents
