4� Prepare appropriate mounting bores.
3.
Fig� 6: Assembly steps 3 and 4
5� Attach the installation plate with four mounting screws, e.g. M8 x 20 mm
(not included in the scope of delivery) at the contact area.
5.
Fig� 7: Assembly step 5
6� Place the damping mat supplied on the installation plate and place the
hydraulic power unit on the installation plate. Thanks to the embossed locking
mechanisms, the hydraulic power unit slides on the installation plate.
If the hydraulic power unit is not positioned completely on the installation plate
but on the locking mechanisms, the hydraulic power unit can be slightly rotated
into the correct position.
6.
Fig� 8: Assembly step 6
Assembly | CytroPac
n 162
4.
RE 51055-B, Edition 07.2022, Bosch Rexroth AG
29/80
4x