Table of Contents
Advertisement
Display
Back
Picture Mode
The [Picture Mode] you select
here can be adjusted in detail
using the following settings from
[Reset] to [Contrast Remaster].
Reset
Picture
Brightness
Color Temperature
Sharpness
Frame Noise Reduction
Block Noise Reduction
Mosquito Noise Reduction Reduces minute mosquito noise that occurs around edges in the video.
Panel Drive Mode
Clear Black
Contrast Remaster
General Setup
Back
Power off when unmounted
Returns to the previous menu.
Vivid: Produces vivid colors and sharp contrast.
Standard: Emphasizes a natural picture to produce a standard quality for a variety of video
sources.
Custom: Stores your customized quality adjustments from the original flat picture.
Resets all adjustment values for the mode selected in [Picture Mode] to their factory default
values.
Adjusts the contrast of the video.
Adjusts the brightness of the video.
Adjusts the color temperature.
Cool: Produces bluish color tones.
Medium: Produces color tones that are between [Cool] and [Warm 1] / [Warm 2].
Warm 1 / Warm 2: Produces reddish color tones. [Warm 2] is redder than [Warm 1].
The factory default setting is [Medium] (when [Picture Mode] is set to [Vivid]) or [Warm 1]
(when [Picture Mode] is set to [Standard] or [Custom]).
Enhances edges in the video to make them stand out, or softens them.
Reduces random static-like noise in the video.
High / Medium / Low: Specify the strength of this function.
Off: Disables this function.
The factory default setting is [Medium] (when [Picture Mode] is set to [Vivid]), [Low] (when
[Picture Mode] is set to [Standard]), or [Off] (when [Picture Mode] is set to [Custom]).
Reduces mosaic-like block noise in the video.
High / Medium / Low: Specify the strength of this function.
Off: Disables this function.
High / Medium / Low: Specify the strength of this function.
Off: Disables this function.
The factory default setting is [Low] (when [Picture Mode] is set to [Vivid]) or [Off] (when
[Picture Mode] is set to [Standard] or [Custom]).
Selects the motion display method for video.
Normal: Standard video display.
Clear: Reduces blurring for fast-moving images.
Notes
• Although selecting [Clear] reduces blurring for fast-moving images, it also darkens the
image as a whole. If this is a concern, select [Normal].
• Depending on the video signal input, the image as a whole may appear to flicker. If this is
a concern, select [Normal].
Adjusts the appearance of black areas in the video. This produces clearer blacks, without a
loss to overall shading.
Optimizes black and white levels automatically to produce high contrast quality, without
faded blacks or whites.
High / Medium / Low: Specify the strength of this function.
Off: Disables this function.
The factory default setting is [Medium] (when [Picture Mode] is set to [Vivid] or [Standard])
or [Off] (when [Picture Mode] is set to [Custom]).
Returns to the previous menu.
On: Turns the unit off automatically 30 minutes after the head mounted monitor is removed.
Off: Disables this function.
Tips
Regardless of this setting, the head mounted monitor's display will turn off automatically 10
seconds after the unit is removed.
29
Modifying Settings
Advertisement
Table of Contents
