Visualization Center Setup; Suggested Hardware Requirements - HP xw3400 User Manual

User manual for linux
Hide thumbs Also See for xw3400:
Table of Contents

Advertisement

You may need to add a Modeline specific for your displays. The vizconfig tool includes modelines
for hp 20", hp 23", and 30" DFPs. If you want to be explicit about the resolution and the refresh
frequency for CRT displays, then insert the modeline generated by the gtf command directly into the
xorg.conf file in the appropriate "Monitor" section as below. (See Modelines in the sample file and
add your new modeline there).
gtf 1280 1024 96
Sample:
Modeline for 1280x1024 projector or monitor with Stereo
# 1280x1024 @ 96.00 Hz (GTF) hsync: 103.87 kHz; pclk: 182.81 MHz
Modeline "1280x1024_96"
1028 1082
-HSync +Vsync
NOTE: The stereo across 2 graphics cards does not work properly with the Gsync card until you get
NVIDIA's rel87xx+ drivers.
Once you have a fully stereo-capable driver from NVIDIA, you will also be able to turn on the stereo
emitter whenever the Xserver starts up (not just when there is a stereo window on the screen) by using
the option below in the ServerLayout section.
Option "ForceStereoFlipping" "1"

Visualization Center Setup

After setting up the station, set up the Visualization Center.

Suggested Hardware Requirements

The following are suggested hardware requirements to set up the Visualization Center. Use more or
less based on your needs.
HP xw9300/xw9400 Workstation with:
two single-core Opteron processors
o
OR two dual-core Opteron processors if apps exploit multi-processing
o
Dual NVIDIA FX4500 or FX5500 graphics cards
OR dual NVIDIA Quadroplex boxes (to support more projectors or single card per projector
port)
NVIDIA Gsync card for graphics card synchronization
Appropriate Large Displays or Projection system (Overlap and edge-blend support if needed)
If stereo is required
High refresh Projectors
o
NVIDIA Gsync card for graphics card synchronization
o
StereoGraphics CrystalEyes stereo glasses
o
StereoGraphics stereo emitters
o
Enough system memory for application data.
# (or whatever your desired settings are)
182.81
1280 1376 1520 1760
1024 1025
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xw4100Xw4300Xw4400Xw4550Xw4600Xw6000 ... Show all

Table of Contents