Table of Contents
Advertisement
11. You should reboot the computer to use our utility properly in the NT-based
OSs(Windows NT4.0, 2000, XP).
12. After rebooting your computer, you can set up Wireless LAN environment by our utility
program provided. Refer to 'Chapter 4' in this manual.
< Method 2 – Installing software first >
1. If you insert the MagicLAN Installation CD into the CD-ROM drive, software will launch
automatically. Then, click on the 'Install MagicLAN Driver'.
2. You can see the pictures of Wireless LAN Cards by model
MiniPCI/PCMCIA/PCI
3. Click on Operating System in the right screen in which you want to install driver.
Card). Click on the model name to install it's driver.
32
name.(SWL-2300M/N/P
Advertisement
Table of Contents
