Table of Contents
Advertisement
Table 13.
Anchor Bolt Drill Bits and Hole Depth
Category
RRH (Wall Type)
[Anchor Hole Cross Section]
[O]
1.73 in.
(44 mm)
* Remove the debris from the drilled hole.
2
Figure 43.
Drilling & Anchoring
0.55 in.
(14 mm)
When fixing the mounting bracket_front or 2 sector mounting bracket
assembly_front on a wall, 'A' side should stick on the wall.
RFV01U-D1A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Anchor Bolt
M10
[X]
Drill anchor holes at marked points with removing dust from the holes using a
cleaner. Fix strong anchor to the drilled hole.
Vacuum Cleaner
Hammer Drill
A
A
Wall
Mounting Bracket_Front
[Top View]
Chapter 2 Installing System
Drill Bits
0.55 in. (14 mm)
Confidential
Hole Depth
1.73 in. (44 mm)
0.55 in.
(14 mm)
M10 Strong Anchor
Anchor Punch
Hammer
41
Advertisement
Table of Contents
