Table of Contents
Advertisement
Figure 29.
Fixing Mounting Bracket Assembly_1 Sector Pole Type (3)
Mounting Bracket_Rear
M10 Carriage Bolt
5
Figure 30.
Levelling Mounting Bracket Assembly_1 Sector Pole Type
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
When fixing the pole mounting bracket assembly on a pole, be sure to check the
level of bracket. After finishing the installation, you can adjust the level minutely.
When occurring poor levelling, adjust the position of fasteners used to fix the
Mounting bracket assembly or its levelling status.
For 2 Sector
The way to fix 2 Sector mounting bracket assembly is as follows:
1
RFV01U-D1A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Side Hole
Check the level of mounting bracket assembly on a pole and adjust the level.
[1 Sector Side & Standard Mounting Bracket Assembly]
To fix Mounting Bracket Assembly_2 Sector Pole Type (Side Installation)
Make sure you have the following items:
Confidential
Chapter 2 Installing System
30
Advertisement
Table of Contents
