Yamaha AW2816 Owner's Manual page 148

Using automix
9
9
Press the top panel PLAY [
back the song.
Automix will be in record mode. However since
a recording channel has not yet been selected,
recording will not actually occur.
10
Listen to the song, and at the desired
punch-in location, press [SEL] key 1 (moni-
tor channel 1), and start operating the
fader.
Punch-in will begin the moment you press the
[SEL] key. When you operate the fader, the previ-
ously-recorded fader position and the currently-
recorded position will both be shown by the bar
graph, as shown in the diagram below. The up or
down arrow displayed beside the bar graph indi-
cates the direction in which you can move the
fader to return to the previously-recorded posi-
tion.
If you moved below
the previously-recorded
position
Previously-recorded
fader position
New fader position
11
When you are finished operating the fader,
press [SEL] key 1 once again to punch-out.
12
When you are finished punching-in/out,
press the top panel STOP [
A popup window will ask you whether you want
to update the recorded contents. If you want to
update, move the cursor to the OK button and
press the [ENTER] key.
142
] key to play
If you moved above
the previously-recorded
position
New fader position
Previously-recorded
fader position
] key.
Operation section