Cancelling The Programme; End Of Programme; Removing Laundry And Switching Off The Appliance; Emptying The Condensation Container - Siemens iQ500 WT47R461ES Installation And Operating Instructions Manual

Operating the appliance
en
If required, select a different
3.
programme or a different
programme setting.~ "Overview of
programmes" on page 20
~ "Programme settings"
on page 22
Do not change the
Note:
programme during the CoolDown
process.
Close the appliance door.
4.
Press ‹ inicio/pausa+carga (Start/
5.
Reload).
The programme duration is
Note:
updated on the display, depending on
the load and on the residual moisture in
the laundry. The values displayed may
change when the programme or load is
changed.

Cancelling the programme

The programme can be cancelled at
any time by opening the door or
pressing ‹ inicio/pausa+carga (Start/
Reload).
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, remove all
items of laundry from the dryer and
spread them out to allow the heat to
dissipate.

End of programme

The following message appears in the
display: "Ÿš
Removing laundry and
switching off the appliance
26
Remove the laundry.
1.
Turn the programme selector to
2.
switch off the appliance.
Emptying the condensation
container
By default, the condensation from the
appliance runs into the condensation
container.
Alternatively, you have the option of
discharging the condensation water
supplied depending on the model. If you
choose to discharge the condensation
water into the waste-water system, you
will not need to empty the condensation
container during the drying programme
or after each time you use the dryer.
* into the waste-water system via a
drain hose
*