Sony Argentina HCD-EC590 Service Manual page 12

HCD-EC59/EC590
CD FACTORY MODE
Note 1: Do not enter the this mode while any other test mode is in prog-
ress.
Note 2: Do not enter any other test mode while the this mode is in prog-
ress.
Procedure:
1. Press the [ ] button to turn the power on.
?/1
2. Press the [FUNCTION] button to select CD function
3. Press three buttons of [u], [USB] and [
4. It enters the CD factory mode and the message "FACTORY"
is displayed. When the [CD] button is pressed, the following
message (initial display) is displayed.
– ON
S character mode setting
Tracking servo setting
RF gain setting
Key Operation:
[CD]:
The display changes in the following order when-
ever the button is pressed.
[DSGX]:
RF gain setting changes whenever the button is
pressed.
"–": No gain fi xation.
"AL": Fix to the gain for AL disc.
"RW": Fix to the gain for RW disc.
[FUNCTION]:
S character mode setting changes whenever the but-
ton is pressed.
" ": S character mode OFF.
"S": S character mode ON.
5. To release from this mode, press three buttons of [u], [USB]
and [ ] simultaneously.
?/1
12
] simultaneously.
?/1