Table of Contents
Advertisement
1
1
2
3
4
5
6
7
8
9
0
2
3
48
1
2
PGM NO
a)
b)
PGM NO
AMS
PGM NO
a)
b)
Various Playback
Operations
To listen to the beginning of a
selection for more than the
designated time
Press the 3 (play) button while the
selection you want to listen to is played
back.
While pressing the 3 button, the
countdown at the MARGIN display stops,
and the playback of that selection
continues.
To listen to an entire selection
Press the MUSIC SCAN button while the
selection you want to listen to is played
back.
The music scan function is released, and
the playback of that selection continues.
Designating the Desired
Selection
By designating the desired program
number, you can listen to the desired
selections directly.
For this operation, the selections must be
numbered by the program numbers.
For how to write the program number, see
page 34.
This operation can be performed only with
the remote commander.
1
Designate the desired program
number with the numeric
button(s)*.
a)Current program number
b)Designated program number
2
Press the 3 3 3 3 3 (play) button.
The designated selection is searched
for at high speed and playback starts
from the beginning of that selection.
a) Displayed number is advanced to
the designated number one by one.
b) Goes off.
* When you press the numeric button(s)
during play-pause mode, the deck enters
the pause mode at the beginning of the
designated selection. Press the 8PAUSE
or 3 button to resume playback.
If an incorrect number is designated
Before pressing the 3 button, press the
CLEAR button.
The displayed program number will be
cleared. Then designate the correct
program number.
Once the 3 button is pressed, it is
impossible to cancel the designated
selection.
Advertisement
Table of Contents
