Table of Contents
Advertisement
REPEAT 1/ALL
Various Playback
Operations
Repeat Play
These functions can be performed only
with the remote commander.
Playing a Selection Repeatedly
Press the REPEAT 1/ALL button on the
remote commander while the desired
selection is played back.
The REPEAT 1 indicator appears.
After the selection is played back, the tape
is rewound to the beginning of that
selection automatically, and the playback
is repeated.
To stop playing a selection
repeatedly and return to the normal
playback
Press the REPEAT 1/ALL button twice.
The REPEAT indicator goes off.
Note on the end of the repeated portion
during the REPEAT 1 play
The tape is rewound to the beginning of
the selection to be repeated when one of
the following is detected.
• Start ID of the next selection
• A blank section of more than 9 seconds
• End of the tape or end ID
• Skip ID with SKIP play activated
Playing all selections repeatedly
During playback, press the REPEAT 1/
ALL button until the REPEAT ALL
indicator appears on the display.
After the tape is played back to the end, it
is rewound to the beginning and the
playback of all selections is repeated. In
the RMS play (page 50), all the selections
programmed are played back repeatedly.
To stop playing all selections
repeatedly and return to the normal
playback
Press the REPEAT 1/ALL button once.
The REPEAT indicator goes off.
Note on the end of the repeated
portion during the REPEAT ALL
play
The tape is rewound to the beginning of
the tape when one of the following is
detected.
• End of the tape or end ID
• A blank section of more than 9 seconds
Number of times to be repeated
The selection to be repeated will be played
back 5 times, and then the tape will stop.
45
Advertisement
Table of Contents
