Yamaha RM Series Manual page 27

- [Low Latency]
When Low Latency is on, processing of the following Advanced Audio Settings can be bypassed to reduce audio delay.
Input Gain, Adaptive Echo Canceller, Noise Reduction, Dereverberation, AGC and PEQ
When used in combination with RM-CR, turn off Low Latency.
- [Input Gain]
Allows you to select the microphone input gain.
With RM-WOM, select one of the following: OFF (0 dB), LOW (3 dB), MEDIUM (6 dB), HIGH (9 dB).
With RM-WDR, select one of the following: OFF (0 dB), LOW (4 dB), MEDIUM (8 dB), HIGH (12 dB).
With RM-WGS, select one of the following: OFF (0 dB), LOW (6 dB), MEDIUM (12 dB), HIGH (18 dB).
With RM-WGL, select one of the following: OFF (0 dB), LOW (6 dB), MEDIUM (12 dB), HIGH (18 dB).
- [Adaptive Echo Canceller]
Allows you to suppress echo generation. Select one of the following: OFF, GENTLE, MEDIUM, STRONG.
- [Noise Reduction]
Allows you to suppress ambient noise from the mix. Select one of the following: OFF, GENTLE, MEDIUM, STRONG.
- [Dereverberation]
Allows you to suppress reverberation. Select one of the following: OFF, GENTLE, MEDIUM, STRONG.
- [AGC Type]
AGC (Auto Gain Control) automatically adjusts the volume of the microphone. For the AGC type, select one of the following: OFF,
SOFT, HARD.
- [AGC Speed]
For the AGC speed, select one of the following: OFF, SLOW, FAST.
RM Series Wireless Microphone System Reference Manual
27