Advertisement
Parts and Their Functions
1
1
Iris, Zoom, Focus, Remote ON/OFF
switch
If it is requied to operate the iris, zoom or
focus ring by hand in adjustment procedure
etc., set each switch to "M" before operation.
In normal operation, the switches must be set
to "A."
<Note>
If the iris, zoom or focus ring is operated by
hand with the associated switch set to "A," a
part of mechanism in the drive unit may be
damaged.
2
7
2
Lens hood
The use of lens hood prevents the extra
circumference light from entering the lens.
OPERATION MODE
FOCUS
ZOOM I R I S
M
A
M
A M
A
3
4 5 6
8
9
:
Attaching/Detaching the lens hood
Attaching
1 Align the free index on the lens hood with the
index mark on th focus ring and insert the
lens hood into the focus ring.
2 Holding the focus ring with one hand, rotate
the lens hood clockwise with the other hand
as viewed from the front of the lens until it
clicks.
Detaching
1 Holding the focus ring with one hand, rotate
the lens hood counterclockwise with the other
hand as viewed from the front of the lens to
align the free index on the lens hood with the
index mark on the focus ring. (It may be
necessary to rotate strongly since there is a
;
positioning stopper inside.)
2 Pull off the lens hood .
<Note>
If the lens hood is rotated without holding the
<
focus ring, there is possibility that the motor in
the drive unit will be damaged.
- 3 -
Lock index
Index mark
Free index
Advertisement
