LG STB-3000 Setup Manual page 42

Custom Master STB Setup (Cont.)
(Continued from previous page)
4. Set up STB/display panel features.
On-screen setup menus control the features of the STB/display.
Press MENU on the Installer Remote to access the STB setup
menus, and then set Channel, Picture, Sound, etc. options to the
desired configurations. See "Clonable STB Setup Menu Features"
list on page 40 and also notes below.
Note: If you intend to use the Zoning feature(s) on this STB, make
sure to assign the appropriate TV Zone # and/or Wi-Fi Zone # at this
time as described in Reference section, "Using the STB's Zoning
Features."
Note: If desired and if appropriate, you can run Auto Tuning (see
step 5) prior to completing this step.
5. (Optional) Run Auto Tuning.
If you are creating a Master STB Setup for cloning purposes and
you want the Target STB(s) to remain in Pass-through Mode, do
NOT run Auto Tuning. If you Learn an auto-tuned/edited channel
lineup from a Master STB Setup, thereby creating a TLX file with
an FTG Channel Map, and then Teach the TLX file to a Target STB,
this will put the Target STB in FTG Mode.
Note: When you Teach a TLX file that contains an FTG Channel
Map to a Target STB (for FTG Mode configuration), you may have
the option to select either logical or physical channel tuning. For
either selection, the channel sequence will be based on the order in
which the channels appear in the FTG Channel Map. You can view
and/or edit the channel sequence in the FTG File Manager, as
required.
a) Use the Installer Remote to access the Quick Settings Menu.
Then, select Channels > Channel Tuning and follow the
on-screen instructions to search for all available analog and
digital channels.
b) Use the Channel Manager option in the Channels Menu to edit
the channel lineup, as necessary. Add/delete channels per your
system requirements.
6. Verify the STB/display panel setup.
Make sure the STB/display features are set per your requirements.
Also, if applicable, verify that the channel lineup is correct.
The Master STB Setup is now ready to be saved to a USB memory
device. See "Cloning Procedures" on pages 43 to 48.
42
QUICK SETTINGS
Quick
Picture
Channels
Aspect Ratio
16:9
Sound
Sleep Timer
^
Off
General
Safety
Accessibility
Use the STB setup menus to set
the display features to the desired
configuration for the end user.
CHANNELS
Quick
Picture
Channel Tuning
Channel Manager
Sound
Channel Label
Multi Audio
^
MONO MONO
General
Audio Language
^
None
Safety
Accessibility
(Optional) Use Channels Menu
options to run Auto Tuning and
edit the channel lineup.
206-4272