LG STB-3000 Setup Manual page 33

Installer Menu Items 071 through 122
Item Function
071 BCK. CH-TIME
073 CH NOT AVBLE
075 REVERT CH
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
086 V. MUTE TIME
088 EN NOISE MUTE
090 KEY LOCK
091 HDMI2 ENABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
097 AUDIO OUTPUT
098 PRO:CENTRIC
100 VIDEO INTERFAC
101 IR FEEDBACK
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
105 VID OUT FORMAT
106 ASP RATIO LOCK
108 PANEL COM
110 PANEL DELAY
111 PANEL VOL PRE
113 PANEL TYPE
116 VIDEO MUTE EN
117 FACT DEFAULT
119 DATA CHANNEL
121 UPDATE TIME HR
122 UPDATE TIME MN
206-4272
Value Range Default Value
0 ~ 7 2
0 / 1 0
0 / 1 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 / 1 1
0 ~ 5 5
0 / 1 0
0 ~ 50 0
0 / 1 1
0 / 1 1
0 ~ 2 1
0 / 1 1
0 ~ 4 2
0 / 9 9
0 ~ 3 0
3 ~ 5 3
0 / 2 0
0 ~ 4 4
0 / 1 1
0 ~ 255 0
1, 4, 5 1
0 / 1 0
0 ~ 3 2
0 ~ 15 8
0 ~ 100 100
0 ~ 4 4
0 / 1 0
0 / 1 0
0 ~ 135, 253,
255
255
0 ~ 23, 128 128
0 ~ 59, 255 0
Brief Description of Function
Chooses custom background color for the STB's Channel-Time display.
If set to 1 and item 028 CH. OVERIDE is set to 0, a "CHANNEL NOT
AVAILABLE" message is displayed if user attempts to direct tune a channel that
is not included in the channel lineup.
If set to 1 and loss of MPI communication occurs, STB tunes to Start Channel.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows-controlled systems.
Removes block hours setting for Parental Control and makes block permanent.
Use to extend the normal video mute time during channel change.
(Analog channels only) If set to 1, audio is muted if no signal is present.
If set to 1, all LG Hospitality and commercial non-LG display panel button
functions are locked. N/A for LG Public Displays or LG Commercial Monitors.
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
Set to 1 to enable SAP feature in Function Menu.
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Set as required in accordance with external audio equipment connected to the
STB. (See detailed descriptions.)
Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for
GEM (Java Application) Mode. Set to 3 for HTML Mode.
Selects HDMI connection for display panel: 3 = HDMI1, 4 = HDMI2, 5 = HDMI3
Set to 2 to disable the STB's Bluetooth feature.
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
Selects Minor Start Channel. Set to 0 for NTSC.
Sets format for video output: 1 = 720p, 4 = 1080p, 5 = 1366 x 768
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on
Sets display panel baud rate: 0 = 1200, 1 = 2400, 2 = 9600, 3 = 115200
Sets the display panel communication delay time.
Determines a preset fixed volume level to set in the display panel.
Sets display panel communication command set. (See detailed descriptions.)
(Analog channels only) If set to 1, video mutes (blank screen) when no
Set to 1 to restore the factory default settings of all Installer Menu items.
Set to 0 to disable. Set from 1 to 135 to match the RF channel number used by
the Pro:Centric server as its data channel. Set to 255 to use Auto Search to find
the Pro:Centric RF channel. (See detailed descriptions.)
Sets the Wake For Update hour. The value "128" is displayed as "OFF." Directly
entering 128 turns the Wake For Update feature OFF.
Sets the minute for Wake For Update. (See detailed descriptions.)
Installer Menu (Cont.)
Selects ATSC band.
power cycle.
signal is present.
33