460
Interface Configuration
Clicking the I
NTERFACE
C
page. The parameters for this page are shown in the
ONFIGURATION
following table.
Parameter
Interface
IGMP Status
Operating Version
Fast Leave
Query Interval
Query Response
Time
Robustness Value
C
tab brings up the IGMP I
ONFIGURATION
Description
This parameter specifies the interface index.
This parameter specifies the IGMP Status.
With this parameter you can choose to run either in
Version 1
IGMP Version 2
,
configured for every interface.
This parameter indicates whether the fast leave processing
for a specific interface, is to be enabled or disabled.
This parameter indicates the interval between two
successive IGMP queries.
This parameter specifies the response time for IGMP
queries.
This parameter specifies the R
interface.
4 Networking Switch Modules
IGMP Version 3.
or
This can be
V
on this
OBUSTNESS
ALUE
NTERFACE
IGMP