430
BGP Peer Configuration
Clicking the N
EIGHBORS
which allows you to configre BGP Neighbors. The parameters for this
page are shown in the following table.
Parameter
IP Address
EBGP MultiHop
Next Hop
Keep Alive Time
(Seconds)
tab brings up the BGP P
Description
This parameter specifies the IP address of the BGP
neighbor.
By enabling this feature, BGP connections can be
established between peers, which are not directly
connected.
Using this parameter, next Hop can be set as
Automatic
. By setting this field to
the switch the next hop for all the routes that it
distributes to its peers.
This parameter specifies the maximum time interval
between successive updates between any two BGP
peers.
4 Networking Switch Modules
C
EER
ONFIGURATION
Self
, you can make
page,
Self
or