Table of Contents
Advertisement
16.6. How to Replace the Shield Case
16.6.1. Preparation
• PbF (: Pb free) Solder
• Soldering Iron
Tip Temperature of 700°F ± 20°F (370°C ± 10°C)
Note:
We recommend a 30 to 40 Watt soldering iron. An expert may be able to use a 60 to 80 Watt iron where someone with less
experience could overheat and damage the PCB foil.
16.6.2. How to Remove the Shield Case
Note:
If you don't have special tools (ex. Hot air disordering tool), conduct the following operations.
1. Cut the case along perforation.
2. Remove the cut part.
3. Cut the four corners along perforation.
4. Remove the reminds by melting solder.
297
KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
Advertisement
Table of Contents
Troubleshooting
