Battery Charge - Panasonic KX-MB2061CXB Service Manual

8.4.2. Charger Unit
AC adaptor
• Connect to a power outlet (220 - 240 V, 50/60 Hz).
Hooks
• Fasten the AC adaptor cord to prevent it from being
disconnected.
Screws (not supplied)
• The charger can be mounted on the wall, if required.
Caution:
• USE ONLY WITH the supplied Panasonic AC adaptor.
• The AC adaptor must remain connected at all times. (It
is normal for the adaptor to feel warm during use.)
• The AC adaptor should be connected to a vertically
oriented or floor-mounted AC outlet. Do not connect the
AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become
disconnected.
• Press the AC adaptor plug firmly.
8.5.

Battery Charge

Place the cordless handset on the charger for about 7 hours
before initial use.
Confirm
When the batteries are fully charged, the charge indicator (1)
goes OFF.
Note:
• It is normal for the cordless handset to feel warm during
charging.
• Clean the charge contacts of the cordless handset (2) and
charger (3) with a soft and dry cloth. Clean if the unit is
exposed to grease, dust, or high humidity.
Battery level
Panasonic Ni-MH battery performance (supplied batteries)
Note:
• It is normal for batteries not to reach full capacity at the initial
charge. Maximum battery performance is reached after a
few complete cycles of charge/discharge (use).
• Actual battery performance depends on a combination of
how often the cordless handset is in use and how often it is
not in use (standby).
• Even after the cordless handset is fully charged, the
cordless handset can be left on the charger without any ill
effect on the batteries.
• The battery level may not be displayed correctly after you
replace the batteries. In this case, place the cordless
handset on the charger and let it charge for at least 7 hours.
111
KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
is displayed.