Pack201 | Operator Interface | Section 4
PARAMETER
Sync # To Reject
Sync Reject Enable
Tucker Enable
Uncut # To Reject (prod)
Uncut Reject Enable
Uncut Reject Shifts (prod)
Units/Product Lineshaft X
© Bosch Packaging Technology, Inc.
All rights reserved 2012
DEFINITION
This is the desired number of packages to reject during a synchroniza-
tion cycle�
In the ON position the sync reject system is active� In the OFF position
the reject is disabled�
In the ON position the tucker option is active� In the OFF position the
option is disabled�
This is the desired number of packages to reject when an uncut package
is detected�
In the ON position the uncut reject eye is active� In the OFF position the
reject eye is disabled�
This is the number of cycles from the uncut reject eye to the reject de-
vice�
This is the number of units (mm, chain pitches) the lineshaft driven
device must move for each product�
EN | 51