Installation Condition Of The Storage Module - Panasonic AV-HS6000 Series Operation Manual

Installation condition of the Storage Module

Installation condition of the Storage Module
Confirm the installation condition of the Storage Module AV‑HS60D1.
1
Select the <SYS> button → [MAINTENANCE] → [Option] tab.
2
Check the [SSD] display in the [SSD] column.
f Display details are as follows.
[Enable]
[Disable]
Expansion of the chroma key function
f The Chromakey Software AV-SFU60G (paid) is required to expand the chroma key function.
f One Chromakey Software AV-SFU60G can acquire one activation code, and chroma key for 1ch/ME (2ch/2ME) can be expanded against a single
Main Frame AV-HS60U1/AV-HS60U2.
f Maximum of 3 Chromakey Software AV-SFU60G can be implemented to a single Main Frame AV-HS60U1/AV-HS60U2. Purchase required number
depending on the system.
f Store the key code supplied with the Chromakey Software AV-SFU60G together with the serial number of the activated Main Frame AV-HS60U1/
AV-HS60U2 in a safe place.
Activation procedure
1
Insert the memory card into the memory card slot.
f Insert the memory card initialized with the unit.
f For details of the initialization of the memory card, refer to "Initializing a memory card" (page 115).
2
Select the <SYS> button → [MAINTENANCE] → [Option] tab.
3
Select [Serial Data File] in the [Activate] column.
f Following folder is created in the memory card.
PRIVATE\MEIGROUP\PAVCN\SBG\P2SD\ACTV\
The machine information file "SERIAL.LST" for the unit is saved in this folder.
4
Acquire the activation code.
f Remove the memory card from the memory card slot and insert it into a PC connected to the Internet.
f Using the browser on the PC, connect to the following activation code issuing site. Acquire the activation code following the procedure displayed.
To acquire the activation code, the key code supplied with the Chromakey Software AV-SFU60G is required.
http://panasonic.biz/sav/actkey_e (English only)
f The activation code "ACTIVE.LST" is saved in the folder on the memory card created in step
depending on the browser when the "ACTIVE.LST" file is already saved. Save after confirming that the "ACTIVE.LST" file does not exist.
5
Insert the memory card into the memory card slot.
f Insert the memory card with the activation code saved into the memory card slot of the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4.
6
Select the <SYS> button → [MAINTENANCE] → [Option] tab.
7
Select an item in the [Activate] column.
f Select the channel of the key to expand the chroma key function.
[Activate Data File Key2]
[Activate Data File Key3]
[Activate Data File Key4]
f The activation code that is already used can be applied to other key channel.
8
Confirm the status in the [License Status] column → [Primatte Key2] to [Primatte Key4]
f The corresponding item will change to [Ready] when correctly activated.
f The item corresponding to the channel of the key that was originally activated will change to [Enable-] when the activation code that was already
used is applied to the other key channel.
[Enable]
[Enable‑]
[Ready]
[Disable]
9
Turn off the power of the Main Frame AV‑HS60U1/AV‑HS60U2, and then turn it on again.
Chapter 8 System Menu — Maintenance settings
The Storage Module is installed.
The Storage Module is not installed.
Expands the chroma key function in KEY2.
Expands the chroma key function in KEY3.
Expands the chroma key function in KEY4.
Activation is enabled, and the chroma key function is operating.
Activation is disabled. The chroma key function is operating currently.
The chroma key function will not operate when the power is turned on next time.
Activation is enabled. The chroma key function is not yet operating.
The chroma key function will operate when the power is turned on next time.
Activation is disabled. The chroma key function is also not operating.
3
. The file name may be automatically changed
– 158 –