Panasonic AV-HS6000 Series Operation Manual page 150

[On]
[Off]
4
Select an item in [DSK Base] in the [DSK PVW Base] column.
f Select the background of the preview output of DSK (DSKPVW1, DSKPVW2, DSK1PVW to DSK4PVW).
[PGM]
[PST]
5
Select an item in [DSK1CLN] to [DSK4CLN] in the [DSKPVW ASSIGN] column.
f Select the signal to be assigned to DSK1CLN to DSK4CLN.
[DSK1CLN] ‑ [DSK4CLN]
[DSK1PVW] ‑ [DSK4PVW]
6
Select an item in [DSKPVW2] in the [DSKPVW ASSIGN] column.
f Select the signal to be assigned to DSKPVW2.
[DSKPVW2]
[DSK1PVW] ‑ [DSK4PVW]
[DSKPST]
Setting the SEL KEYPVW output
The preview for the corresponding key is output to the SEL KEYPVW output when the <KEY1> to <KEY4>, and <DSK1> to <DSK4> buttons in the KEY
operation area of ME are pressed.
The chroma key adjustment preview screen is displayed when the key type of the corresponding key is [Chroma].
1
Select the <SYS> button → [MAIN FRAME] → [Sel KeyPVW] tab.
2
Select an item in the [Panel Ctrl] column in the [Mode] column.
[On]
[Off]
3
Select an item in [Key1 Enable] to [Key4 Enable] in the [ME1]/[ME2]/[DSK] column.
[On]
[Off]
Chapter 8 System Menu — Setting the Main Frame AV‑HS60U1/AV‑HS60U2
Adds to the DSK preview output.
Does not add to the DSK preview output.
Uses the PGM output of ME in the last line.
However, for the DSKPVW output against the DSKPGM that is not assigned to [DSK1] to [DSK4] of the [Config] column
will be the PVW output of ME in the last line.
Uses the PVW output of ME in the last line.
This cannot be selected when the [Combine] item in the [DSK PVW] column is set to [Off].
Assigns the clean signal for corresponding DSK.
Assigns the individual preview signal for corresponding DSK.
Assigns the signal for preview of DSKPGM2.
Assigns the individual preview signal for corresponding DSK.
Assigns the PVW output for ME of the last line.
The preview of the corresponding key is output by pressing the <KEY1> to <KEY4> or the <DSK1> to <DSK4> buttons
in the KEY operation section of each ME.
The SEL KEYPVW output will not change when the <KEY1> to <KEY4> or the <DSK1> to <DSK4> buttons in the KEY
operation section of each ME is pressed.
Outputs the image where the key is combined when the button of the corresponding key is pressed.
Outputs the image where the key is not combined when the button of the corresponding key is pressed.
– 150 –