Table of Contents
Advertisement
52/68
Maintenance and repair
Bosch Rexroth AG, ActiveShuttle: ActiveShuttle 1.0, 3 842 560 593/2020-07
10 Maintenance and repair
• Servicing only by Bosch Rexroth.
• Return shipment only in original transport packaging with mounted lift aid.
• Observe DIN EN ISO 13857 when you remove or replace safety guards and/or
bypass safety equipment.
10.1 Cleaning and care
Bearing failure
Applying grease-dissolving substances to the bearing points, e.g. during cleaning,
leads to bearing failure. There is a risk of damage to property, and service life may
be reduced.
Keep degreasers or aggressive cleaning agents away from the bearings!
Only clean the product with a dry or slightly damp cloth.
Loss of ESD safety
Dirty casters impair the discharge value of the loading area and may therefore lead
to loss of ESD safety.
Remove dirt from the casters regularly.
Damage to personal protection systems (laser scanner)
Incorrect cleaning may cause damage to the glasses of the personal protection
systems.
Particle contamination: Carefully clean the glasses of the personal protection
systems with a dry soft cloth.
Liquids contamination: Carefully clean the glasses of the personal protection
systems with a damp soft cloth (water or mild detergent).
Damage to the lithium-ion batteries by liquids
Lithium-ion batteries may be damaged by liquids during cleaning.
• Only clean removed lithium-ion batteries with a dry cloth.
10.2 Regular safety inspections
Danger of injury due to safety checks not carried out!
Risk of serious injury from non-functioning safety and warning devices.
Carry out a test of the visual and audible warning devices on a daily basis.
Carry out a test of the safety devices at least every 6 months.
Take vehicles with non-functional safety and warning devices out of service and
contact the Bosch Rexroth Service.
NOTICE
CAUTION
Advertisement
Table of Contents
