Siemens SINUMERIK 840D sl Commissioning Manual page 42

Adapting the user interface
8.1 Change Language
Selecting second language
MD9100 $MM_CHANGE_LANGUAGE_MODE
Language selection mode
= 2
See also
Principles of start-up (Page 11)
Configuring tool management (Page 81)
36
Press the "OK" softkey.
HMI sl switches to the language selected.
Selection of two languages. During operation, the "Change language" softkey
can be used to toggle between these languages.
1. Select the "Startup" operating area.
2. Press the "HMI" softkey.
3. Press the ">>" softkey.
4. Press the "Language selection" softkey.
The "Language Selection" window opens.
All the installed languages are displayed in the fields "First language"
and "Second language".
5. Select a language in each of these.
6. Press the "INPUT" key.
- OR -
Press the "OK" softkey.
During operation, you can switch between the two languages by
pressing the "Change language" softkey.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)