Announcement Recording - Siemens HiPath 1100 Series Programming Manual

Step by Step
...
0
0
...
0
...
0
...
0 1
or * Select the next digit for Call Forwarding.
9
or
Press this key.
#
Initial state for Programming Mode.
To Remove an Option
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 9
or * Select the Call Forwarding digit to be removed.
9
Wait 5 second to delete.
or * Select the Call Forwarding digit to be removed.
9
or
Press this key.
#
Initial state for Programming Mode.

Announcement Recording

The system provides a feature for recording announce-
ments for auto-answering, call transfers, and alarms.
The recording is done using the handset. We suggest
that you record your announcement in a quiet environ-
ment. You can check the recorded announcement by
playing it back.
You can record a different announcement for each mode
of operation.
To ensure proper operation record at least one greeting
announcement and one announcement for transferring
calls.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
3 7
or Enter code "9" to "record new announcement" or "0" to
9 0
"play back announcement."
Next, enter the code for selecting one of the following
1 2
announcements:
Fax/DID Module
109