Connecting To The Zonescape Unit; Setting Zonescape Unit / Module Time And Date; Zonescape App Defaults; Configuring Schedules - Philips Hadco ZoneScape 1-A Documentation

Connecting to the ZoneScape unit

The following pre-requisites are required in order to connect and configure a
ZoneScape module / unit :
 A connection via WIFI has to be established between the user's Smartphone
and the target ZoneScape unit / module
 Depending on the Smartphone the user needs to have one of the ZoneScape
apps installed on his Smartphone either the ZoneScape App for IOS or the
ZoneScape Android application.
After a successful WIFI connection the user can simply start the ZoneScape App and
start controlling the ZoneScape Relays / Zones Directly via the App user interface, or
configure a Schedule for turning Zones on and off .

Setting ZoneScape unit / module Time and Date

Every time the ZoneScape app is started and if there is a established connection
between the user's Smartphone and the target ZoneScape module. The ZoneScape
app will send the Current Date and Time as well as the current Day of the Week and
those data will be recorded and stored into the ZoneScape unit non-volatile memory
and the time / date settings will be set to the on board Real-time clock of the
ZoneScape unit.
The above process is executed every time the user connects and starts the
ZoneScape app. The Time and Date , taken from the user's Smartphone is considered
to be the correct time/date setting as the Smartphone itself is synchronized once by
the GSM / 3G / 4G networks and also via NTP.

ZoneScape APP Defaults

The ZoneScape App for IOS and Android is configured by default to connect to a
single ZoneScape unit with the following default network parameters:
 IP Address : 192.168.16.254
 PORT: 8080
These parameters can be changed by tapping on the ZoneScape app "Settings" tab. If
a change is made in these settings the user will also have to apply the same changes
in the target ZoneScape module web configuration interface, so that both the
settings in the app and the settings in the module match, which is crucial for
establishing a connection between the APP and the module.

Configuring Schedules

ZoneScape 1-A module documentation
.
Proposal Page 7 of 28