Table of Contents
Advertisement
3
Adjust the color.
Select [BOX Matte] in the R menu and adjust the color in the color palette screen.
4
Set the position and size.
Select [BOX Adjust] in the R menu, and set [X], [Y], [H Size], and [V Size] in the encoder menu.
5
Set the density.
Select [BOX Adjust] in the R menu, and set [Density] in the encoder menu.
PinP (Picture in Picture)
Entered key fill and key source signals are moved and expanded using DVE effects and are combined with the background image.
Since PinP uses DVE effects, the image is delayed by one frame.
Setting the PinP shape
1
Select the <ME1>/<ME2> button → [PinP1], [PinP2] → [Resizer] tab.
2
Set [Mark Shape].
f Select [Square] (square), [Circle] (circle), [Heart] (heart), [Flower] (flower), or [Star] (star), for the PinP shape.
f When [Square] is selected, the display area can be adjusted with [Trim (Square)].
Adjusting PinP
Adjusting the position and size
1
Select the <ME1>/<ME2> button → [PinP1], [PinP2] → [Resizer] tab.
2
Set [X] and [Y] in the [Position] column.
f Set the PinP position.
3
Set [Size] in the [Position] column.
f Set the PinP size.
f Up to 100% can be set for [PinP1] and [PinP2].
4
Set [X], [Y], and [Z] in the [Rotation] column.
f Set the tilt for the PinP image.
f This setting is available only for [KEY1] and [KEY2].
f [X] and [Y] will be disabled when anything other than [Off] is selected in [WipeMask] in the [Mode] column.
5
Set [X-Aspect] and [Y-Aspect] in the [Rotation] column.
f Set the aspect ratio for the PinP image.
f This can be set only for [KEY1] and [KEY2].
PinP decorations
Add a border or soft effect to PinP.
1
Select the <ME1>/<ME2> button → [PinP1], [PinP2] → [Resizer] tab.
2
Select an item in [Border] in the [Border] column.
[Off]
[On]
3
Set [Width] in the [Border] column.
f Sets the border width.
4
Set [Soft] in the [Border] column.
f Sets the amount of soft effect. When set to [0.0], the soft effect is disabled.
5
Set an item in [Mode] in the [Border] column.
[Fix]
[Variable]
NOTE
@
t When [Border] in the [Border] column is set to [On], the amount of soft effect set using [Soft] in the [Border] column is indicated as the ratio of soft
effect to the border width. To add only soft effect to PinP, set [Border] in the [Border] column to [Off].
Setting the border color
1
Select the <ME1>/<ME2> button → [PinP1], [PinP2] → [Resizer] tab.
Chapter 5 Basic Operations — KEY
Does not add the border effect.
Adds the border effect.
Keeps the border width constant.
Changes the border width to suit the PinP size.
– 67 –
Advertisement
Table of Contents
