Table of Contents
Advertisement
Setting the ME1 PVW/ME2 PVW output
A preview signal of the BKGD and KEY1, KEY2 which were selected in the next transaction can be output.
Select [Key1], [Key2] from the <ME1>/<ME2> button on the top menu → [KEY1], [KEY2] → [Chroma] → [Sample] → [Chroma PVW] to switch to the
preview screen for chroma key adjustment of the corresponding keyer.
1
Select the <SYS> button → [ME SETTINGS] → [ME1,2] tab.
2
Select an item in [Key1], [Key2], [PinP1], [PinP2] in the [ME1 PVW]/[ME2 PVW] column.
[Off]
[On]
3
Select an item in [Chroma PVW] in the [ME1 PVW]/[ME2 PVW] column.
[Enable]
[Disable]
Setting the DSKPGM1/DSKPGM2 output
Selects the video to be the base of DSKPGM1 and DSKPGM2.
1
Open the <SYS> button → [DSK SETTINGS] → [DSK Assign] tab.
2
Select an item in the [DSK Assign] column → [Assign Mode].
[Common]
[Each]
3
Select an item in the [DSK Assign] column → [DSKPGM1]/[DSKPGM2].
[ME1PGM], [ME2PGM]
[ME1CLN], [ME2CLN]
f For details of ME1CLN and ME2CLN output settings, refer to "Setting the ME1 CLN/ME2 CLN output".
Setting DSKPVW1/DSKPVW2 output
The unit can output 2 signals for preview output and clean output in addition to the DSKPGM1 or DSKPGM2 for program output as the DSK output.
f DSKPVW1: Signal for preview of DSKPGM1
f DSKPVW2: Signal for preview of DSKPGM2
Following signals can be assigned to the DSKPVW2 in addition to the signal for preview of DSKPGM2.
f DSK1PVW: Signal for individual preview of DSK1
f DSK2PVW: Signal for individual preview of DSK2
1
Select the <SYS> button → [DSK SETTINGS] → [DSK Out1]/[DSK Out2] tab.
2
Select an item in [Type], [DSK1], [DSK2] in the [DSK PGM1]/[DSK PGM2] column.
f Set [DSK PGM1]/[DSK PGM2].
3
Select an item in [Type], [DSK1], [DSK2] in the [DSK PVW1]/[DSK PVW2] column.
f Set [DSK PVW1]/[DSK PVW2].
4
Select an item in [Type], [DSK1], [DSK2] in the [DSK EXT1-1]/[DSK EXT1-2]/[DSK EXT2-1]/[DSK EXT2-2] column.
f Set [DSK EXT1-1]/[DSK EXT1-2]/[DSK EXT2-1]/[DSK EXT2-2].
5
Select an item in [Priority DSK1], [Priority DSK2] in the [Priority DSK1-2] column.
Chapter 8 System Menu — ME unit settings
Does not output signals.
Outputs the preview signal of the corresponding keyer.
Displays the preview screen for chroma key adjustment in each preview output.
Does not display the preview screen for chroma key adjustment in each preview output.
f Makes the base video for DSKPGM1 and DSKPGM2 the same.
Setting of the [DSK Assign] column → [DSKPGM1] is applied to both DSKPGM1 and DSKPGM2.
f Different base videos can be set for DSKPGM1 and DSKPGM2.
Settings of the [DSK Assign] column → [DSKPGM1] and [DSKPGM2] are applied to DSKPGM1 and DSKPGM2
respectively.
ME1PGM and ME2PGM will be the base video, respectively.
ME1CLN and ME2CLN will be the base video, respectively.
– 127 –
Advertisement
Table of Contents
