Scan Setting; Scanning Parameter Setting Screen - Toshiba e-STUDIO GL-1010 Operator's Manual
Network scan feature
Hide thumbs
Also See for e-STUDIO GL-1010:
- Administrator's manual (427 pages) ,
- Network fax manual (98 pages) ,
- Network fax operators manual (88 pages)
Table of Contents
Advertisement
SCAN SETTING
80
originals, data being read at the time of the error is canceled.
Data that was read before the error, is stored.
The maximum size for a single scan job is 180 MB.
−
The maximum size limit may be less and vary depend-
ing on the available memory and available free space
on the controller HDD.
Each Template icon is assigned to a Template that has been setup
using the TopAccess web utility. Scan parameters such as
resolution, rotation, exposure, etc., are defined when Templates
are created. You can change these scan parameter settings by
pressing the
S
ETTING
Press the
S
1
ETTING
screens (three screens in total) display.
Press the key that corresponds to the scan setting you want to
2
change. Press the
previous or next page.
Scanning Parameter Setting Screen (Page 1)
Select the Single/Double sided:
3
− Single
− Book
− Tablet
key.
key. The Scanning Parameter Setting
or the
PREV
NEXT
GL-1010 Scan Operator's Guide
key to move to the
Advertisement
Table of Contents
