GE PACSystems RX3i Command Line Interface Manual page 41

`
show config
Parameter Sources
The Src column indicates the entity that last set the parameter. The following table defines the
entities that may be listed.
PME The parameter was set via the hardware configuration from Proficy Machine Edition.
DCP The parameter was set through DCP, a protocol typically used by Proficy Machine
Edition, PROFINET Controllers, third-party controllers and third-party programmers to
set parameters such as Device Name and IP Address).
CMD The parameter was set through the Command Line Interface.
DEF The parameter has not been set and is the default value.
NA The parameter does not apply in the current configuration
Redundant Media Roles
The Role parameter shown as part of the Redundant Media configuration defines the current
function of the module on the Media Redundancy Ring. Possible values for this parameter are:
Disabled Media Redundancy is currently disabled.
Client Module is operating as a Media Redundancy Client (MRC).
Manager Module is operating as a Media Redundancy Manager (MRM).
GFK-2572 Chapter 2 Monitor Level Commands
2
2-25