Node - GE PACSystems RX3i Command Line Interface Manual

`

node

node
Global Command
The node command displays device ID and physical module information. This command
displays the same information as the show node command without parameters (see page 2-43).
node Command Format
node
Example
device-name> node
25-FEB-2011 15:00:33.0579
<<< Node Info >>>
Device Type:
Catalog Number: IC695PNC001
Serial Number: A123456
Date Code: 11-JUN-2011
Revision Information:
Primary FW:
Boot FW:
FPGA:
BIOS:
PNIO Stack:
(c) 2008-2011
<<< Node ID >>>
Device Name:
IP Address:
Subnet Mask:
Default Gateway:
device-name>
GFK-2572
Screen Display
PROFINET Controller
1.00 (05D1)
1.00 (01D1)
0.33 (46A1)
PNC1D001 (23-JUL-2010)
2.1.6.1
GE Intelligent Platforms, Inc.
device-name
10.10.0.134
255.255.255.0
10.10.0.1
Chapter 2 Monitor Level Commands
All rights reserved.
2
2-17