Siemens SINUMERIK Series Operating Manual page 410

Programming technological functions (cycles)
10.1 Drilling
Figure 10-3
See also
Positioning and position patterns (Page 406)
Procedure
Parameter Description
LAB - (only for G Repeat jump label for position
code)
PL - (only for G Machining plane
code)
Axes Selection of the participating axes
● XY (1st and 2nd axis of the plane)
● XA (1st rotary axis and assigned linear axis)
● XYA (1st rotary axis and both axes of the plane)
Note:
Rotary axes are only displayed in the selection field if they have been released for use
in the position pattern.
Please observe the information provided by your machine manufacturer.
410
Y axis is traversed (Y0, Y1)
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Positions" softkey.
The "Positions" input window opens.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Unit
Milling