Siemens SINUMERIK Series Operating Manual page 248

Machining the workpiece
6.12 Display and edit user variables
Activating user variables
248
6. Define the desired user variable.
7. Press the "Exit" softkey to close the editor.
1. Press the "Activate" softkey.
A prompt is displayed.
2. Select whether the current values in the definition files should be retained
- OR -
Select whether the current values in the definition files should be deleted.
This will overwrite the definition files with the initial values.
3. Press the "OK" softkey to continue the process.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling