8.5 G51 To G54, Temperature Sensor Module Tm150; General Information - Siemens SINAMICS S120 Manual

8.5 G51 to G54, temperature sensor module TM150
8.5.1

General information

Availability of option
These options are available for the following S120 Cabinet Modules:
● Line Connection Module
Description
The Terminal Module TM150 is used for acquiring and evaluating several temperature
sensors.
In this case, option G51 is for 1 temperature sensor module, option G52 for 2 temperature
sensor modules TM150 etc.:
● G51: 1 temperature sensor module TM150
● G52: 2 temperature sensor modules TM150
● G53: 3 temperature sensor modules TM150
● G54: 4 temperature sensor modules TM150
The temperature is measured in a temperature range from -99 °C to +250 °C for the
following temperature sensors:
● PT100 (with monitoring for wire breakage and short-circuit)
● PT1000 (with monitoring for wire breakage and short-circuit)
● KTY84 (with monitoring for wire breakage and short-circuit)
● PTC (with short-circuit monitoring)
● Bimetallic NC contact (without monitoring)
For the temperature sensor inputs, for each terminal block the evaluation can be
parameterized for 1x2-wire, 2x2-wire, 3-wire or 4-wire. There is no galvanic isolation in the
TM150.
A maximum of 12 temperature sensors can be connected to Terminal Module TM150.
Cabinet Modules
Manual, 03/2013, A5E03263538A

8.5 G51 to G54, temperature sensor module TM150

Options
375