Ecm Default Setting - Toshiba DP125F Operator's Manual

ECM Default Setting

ECM (Error Correction Mode) is
1
an internationally-recognized er-
ror correction system. It enables
error free communications by
automatically re-sending any
Press:
portion of the document affected
by phone line noise or distor-
tion.
NOTES:
• Default ECM setting is
ON.
• Both the sender and the
receiver must have the
ECM feature to perform
ECM communications.
• This setting cannot be
changed if a document is
stored in memory. Re-
sidual memory must be
100%.
• ECM is required for Su-
per G3 (33,600 bps) op-
erations. If ECM is dis-
abled, Super G3 opera-
tions are, also, disabled.
2
Display the SET Select the ECM
ECM Menu Option
Select the desired ECM option.
The LCD screen shown below is
displayed for 2 seconds.
+
To turn ECM to ON, press:
+
To turn ECM to OFF, press:
+
+
OPERATION COMPLETED
SET ECM
1.ON
Displayed for 2 seconds
2.OFF
Returns to display the SETUP
menu screen.
3
Select Another
SETUP Item, or ...
After completing this Configura-
tion Setting, you may continue
to select other settings referring
to their associated pages for in-
structions, or press
to exit the Configuration Setting
mode and return to the Standby
Mode.
63