Relay Originator Report Setting
Display the RELAY
1
2
ORG. REPORT Menu
Press:
Select the desired option to print
a report whenever a Relay trans-
mission is sent.
+
NOTE:
+
+
To ALWAYS print a report when-
ever a document is transmitted,
press:
+
To only print a report when an er-
+
ror has occurred, press:
+
To turn OFF Automatic printing of
reports, press:
SET RELAY ORG. REPT.
1.ALWAYS
2.ON ERROR
3.OFF
3
Select the Option for
Relay Originator
To print a first page image of the
facsimile document on the trans-
mission report, press:
This is only applicable if the
DP120F/DP125F is used as
To not print a first page image of
an Originator for a relay trans-
the facsimile document on the
mission (see page 134).
transmission report, press:
The following screen is dis-
played to confirm your selection.
OPERATION COMPLETED
After
Originator Report Setting, you
may continue to select other
Report settings referring to their
associated pages for instruction,
or press
PRINT 1ST PG IMAGE?
1.ON
2.OFF
to exit the Report Setting mode
and return to the Standby Mode.
Set the Option for
First Page Image
completing
the
Relay
201